Excavator - 400 Series

BACK to MATRIX
MACHINE COMPATIBILITY

Case CX490, CX500      Caterpillar 349, 352      Doosan DX420, DX490      Hitachi ZX470      Hyundai HX480      John Deere 470G      Kobelco SK500      Komatsu PC490      Liebherr R 938, R 945      Link-Belt 490      Sany SY465      Volvo EC480


  • Couplers

    Lbs Part#
    Manual Coupler 1200 400CM901
    Hydraulic Coupler 1200 400CH901
    The EFI Hydraulic Coupler is the most compact design on the market. Includes a 5000psi cylinder with pilot check relief and a dual pressure control valve that virtually eliminates a stuck wedge and a 4 point safety system with override to manual kit.
    Built with 100% High Tensile Steel
    The Manual Wedge Coupler provides versatility for operators to change out attachments with ease, in minutes.

  • Thumbs

    Part#
    Thumb 400TH901
    Rock Thumb - Built For Aggressive Applications with Removable Teeth 400TH901
    Pro-Link Thumb 400TP901
    Pro-Link Rock Thumb - Built For Aggressive Applications with Removable Teeth 400TP902
    + Tine Options 400TH911
    + Thumb Installation Kit 400TH907
    Exceptional degrees of rotation.
    Matches well with all common size EFI buckets and rakes.
    Powerful 5000psi Double Barrel cylinder
    Comes with prefabricated stick laminate to save on install time
    Designed to close tight against the stick.
    Built with 100% High Tensile Steel

  • Dig Buckets

    Teeth Capacity Yd³ Lbs Part#
    36” Dig Bucket 3 1.56 3350 400BD901
    42” Dig Bucket 4 1.90 3540 400BD902
    48” Dig Bucket 5 2.24 3790 400BD903
    54” Dig Bucket 5 2.59 4030 400BD904
    60” Dig Bucket 6 2.94 4275 400BD905
    + Add/Subtract Teeth
    + Custom Teeth & Adapters
    100% High Tensile Steel construction & AR450 wear protection.
    E-Z Grab Lift Bar
    Engineered for optimized break out force, and quick material release.
    G.E.T. options available.

  • Rock Bucket

    Teeth Part#
    42” Rock Bucket 4 400BK901
    48” Rock Bucket 5 400BK902
    + Add/Subtract Teeth
    + Custom Teeth & Adapters
    Reinforced Structural Design, with AR450 internal liner.
    Corner gussets for weld protection,
    Optional Armor & G.E.T. Available
    Double Width side cutting edge, along with top and side wear plates.
    EZ Grab Lift Bar
    Thicker base edge.

  • Cleanup Buckets

    Capacity Yd³ Lbs Part#
    72” Cleanup Bucket 3.63 5125 400BC901
    84” Cleanup Bucket 4.33 5635 400BC902
    96” Cleanup Bucket 5.02 6145 400BC903
    100% High Tensile Steel construction & AR450 wear protection.
    Bolt-On cutting edge optional.
    Designed to handle loose material and bulk loading applications.
    Excellent for spreading material and final grading.
    E-Z Grab Lift Bar

  • Wrist Buckets

    Part#
    72” Wrist Bucket 400BW901
    84” Wrist Bucket 400BW902
    96” Wrist Bucket 400BW903
    Wrist Buckets provide versatility for the operator when grading on uneven terrain.
    100% High Tensile Steel construction & AR450 wear protection.
    Bolt-On Edge optional.
    Dual cylinders with 45º tilt both ways.

  • Chuck Blades

    Part#
    108” Chuck Blade 400DK902
    120” Chuck Blade 400DK904
    + Bolt-on Side Plates 400DK905
    Used for moving and grading wet material that would otherwise get stuck in a bucket.
    100% High Tensile Steel construction & AR450 wear protection.
    Dual Cylinders with 45º tilt both ways.
    Bolt-On edge optional.
    The back of the Chuck Blade was designed for precision grading.
    Optional AR 450 bolt-on side plates.

  • V Ditch Bucket

    Lbs Part#
    24” x 84” V-Ditch Bucket 4620 400BV901
    32” x 90” V-Ditch Bucket 400BV902
    + Bolt on Edges
    + Weld on Adapters & Teeth
    The strongest V-Ditch on the market.
    100% High Tensile Steel construction & AR450 wear protection.
    Reinforced structural design with the highest quality fabrication.
    E-Z Grab Lift Bar
    Designed to dig a safe side slope angle, while generating a narrow floor.

  • Frost Buckets

    Teeth Part#
    36” Frost Bucket 7 400BF901
    42” Frost Bucket 7 400BF902
    Reinforced structural design
    100% High Tensile Steel construction & AR 450 wear protection.
    Works well in hard ground & frozen ground applications.
    Custom Sizes Available
    Increases penetration into frozen and hard ground by focusing penetration force.

  • Skeleton/Screening Bucket

    Part#
    Please Contact Us TBD
    Designed to remove and separate rocks and debris from soil and sand.
    100% High Tensile Steel construction.
    Custom screen sizes available.

  • Ditching Bucket

    Part#
    Please Contact Us TBD
    100% High Tensile Steel construction & AR450 wear protection.
    Drainage holes and mud release chains are optional.
    Extra wide bucket used for ditch cleaning, sloping and grading.
    Add a smooth or serrated edge for different applications.

  • Rippers

    Lbs Part#
    60” Ripper - Includes Removable Tooth 2630 400RI901
    + Shank Guard - 450 Brinell
    Optional replaceable AR450 Shank Guard on 160s and up.
    E-Z Grab Lift Bar
    Full adapter instead of nose piece - reduces broken adapters.
    Flat cleanup edge on the bottom for moving materials while ripping.
    100% High Tensile Steel construction & AR450 wear protection.

  • Brush Rakes

    Tines Part#
    72” Brush Rake 6 400RB901
    84” Brush Rake 6 400RB902
    The Brush Rake is designed to easily remove and pile brush, roots and stumps with minimal retained soil.
    Matches precisely with EFI thumbs.
    100% High Tensile Steel construction.

  • Cutting Edges

    Part#
    74” Smooth Edge 400ED901
    74” Serrated Edge 400ED907
    88” Smooth Edge 400ED903
    88” Serrated Edge 400ED909
    98” Smooth Edge 400ED905
    98” Serrated Edge 400ED911
    Bolt on cutting edges extend the life of a bucket by adding a wear edge to the front of a bucket.
    Serrated Edges are designed to loosen hard to penetrate materials, such as pached gravel.
    Edges include hardware.
    Rake edges are designed to dig like a tooth and grade like a smooth edge.
    Made with AR 450 steel
    Smooth edges are designed for loose material, or finishing and grading work.

  • Options

    Part#
    Pin Connected Lugging (Pins Not Included) 400LP901
    Individual Pins 400LP902
    Wedge Conversion Lugs 400LU903
    + Installation 400LU904
    100% High Tensile Steel construction.
    Pins
    Pin-on lugging
    May be subject to design fees.
    Wedge style lugging

  • Adapters

    Part#
    Bolt On Adapter 400AD901
    Pin On Adapter 400AD902
    100% High Tensile Steel construction.
    May be subject to design fees.
    Made to fit any quick coupler design or lugging configurations.
    Built to suit all different types of Hammers, Compactors, Augers, etc.
    Available in pin-on or bolt-on options.