Excavator - 250 Series

BACK to MATRIX
MACHINE COMPATIBILITY

Case CX245, CX250, CX290, CX300      Caterpillar 326, 330      Doosan DX255      Hitachi ZX245, ZX250, ZX300, ZX345      Hyundai HX260, HX300      John Deere 245G, 250G, 300G      Kobelco SK260, SK270, SK300      Komatsu PC240, PC290      Liebherr R 922, R 924, R 926      Link-Belt 245, 250, 300      Sany SY245, SY265      Volvo EC250, EC300


  • Couplers

    Lbs Part#
    Manual Coupler 375 250CM901
    Hydraulic Coupler 610 250CH901
    The EFI Hydraulic Coupler is the most compact design on the market. Includes a 5000psi cylinder with pilot check relief and a dual pressure control valve that virtually eliminates a stuck wedge and a 4 point safety system with override to manual kit.
    Built with 100% High Tensile Steel
    The Manual Wedge Coupler provides versatility for operators to change out attachments with ease, in minutes.

  • Thumbs

    Lbs Part#
    Thumb 1300 250TH912
    Rock Thumb - Built For Aggressive Applications with Removable Teeth 1300 250TH913
    Pro-Link Thumb 1720 250TP901
    Pro-Link Rock Thumb - Built For Aggressive Applications with Removable Teeth 1720 250TP904
    + Tine Options 250TH911
    + Thumb Installation Kit 250TH907
    Exceptional degrees of rotation.
    Matches well with all common size EFI buckets and rakes.
    Powerful 5000psi Double Barrel cylinder
    Comes with prefabricated stick laminate to save on install time
    Designed to close tight against the stick.
    Built with 100% High Tensile Steel

  • Dig Buckets

    Teeth Capacity Yd³ Lbs Part#
    30” Dig Bucket 4 0.88 1700 250BD901
    36” Dig Bucket 4 1.25 1875 250BD903
    42” Dig Bucket 5 1.38 2000 250BD905
    48” Dig Bucket 5 1.63 2180 250BD907
    + Add/Subtract Teeth
    + Custom Teeth & Adapters
    100% High Tensile Steel construction & AR450 wear protection.
    E-Z Grab Lift Bar
    Engineered for optimized break out force, and quick material release.
    G.E.T. options available.

  • Rock Bucket

    Teeth Capacity Yd³ Lbs Part#
    36” Rock Bucket 4 1.25 1875 250BK901
    42” Rock Bucket 4 1.38 2000 250BK902
    + Add/Subtract Teeth
    + Custom Teeth & Adapters
    Reinforced Structural Design, with AR450 internal liner.
    Corner gussets for weld protection,
    Optional Armor & G.E.T. Available
    Double Width side cutting edge, along with top and side wear plates.
    EZ Grab Lift Bar
    Thicker base edge.

  • Cleanup Buckets

    Capacity Yd³ Lbs Part#
    60” Cleanup Bucket 2.13 2240 250BC901
    66” Cleanup Bucket 2.38 2380 250BC903
    72” Cleanup Bucket 2.63 2520 250BC905
    100% High Tensile Steel construction & AR450 wear protection.
    Bolt-On cutting edge optional.
    Designed to handle loose material and bulk loading applications.
    Excellent for spreading material and final grading.
    E-Z Grab Lift Bar

  • Wrist Buckets

    Capacity Yd³ Lbs Part#
    66” Wrist Bucket 2.00 3500 250BW904
    72” Wrist Bucket 2.25 4300 250BW906
    Wrist Buckets provide versatility for the operator when grading on uneven terrain.
    100% High Tensile Steel construction & AR450 wear protection.
    Bolt-On Edge optional.
    Dual cylinders with 45º tilt both ways.

  • Chuck Blades

    Lbs Part#
    72” Chuck Blade 250DK902
    84” Chuck Blade 4400 250DK904
    + Bolt-on Side Plates 250DK905
    Used for moving and grading wet material that would otherwise get stuck in a bucket.
    100% High Tensile Steel construction & AR450 wear protection.
    Dual Cylinders with 45º tilt both ways.
    Bolt-On edge optional.
    The back of the Chuck Blade was designed for precision grading.
    Optional AR 450 bolt-on side plates.

  • V Ditch Bucket

    Lbs Part#
    24” x 72” V-Ditch Bucket 3020 250BV901
    30” x 72” V-Ditch Bucket 250BV902
    + Bolt on Edges
    + Weld on Adapters & Teeth
    The strongest V-Ditch on the market.
    100% High Tensile Steel construction & AR450 wear protection.
    Reinforced structural design with the highest quality fabrication.
    E-Z Grab Lift Bar
    Designed to dig a safe side slope angle, while generating a narrow floor.

  • Frost Buckets

    Teeth Part#
    30” Frost Bucket 5 250BT901
    36” Frost Bucket 7 250BT902
    Reinforced structural design
    100% High Tensile Steel construction & AR 450 wear protection.
    Works well in hard ground & frozen ground applications.
    Custom Sizes Available
    Increases penetration into frozen and hard ground by focusing penetration force.

  • Trench Buckets

    Teeth Part#
    16” Trench Bucket, Depth: 66” 2 250BT901
    16” Trench Bucket 2 250BT902
    Great option for minimal ground disturbance.
    Custom sizing available.
    Used for digging narrow cable trenches, pipe culverts and drains.
    100% High Tensile Steel construction.
    E-Z Grab Lift Bar
    AR 450 wear plate protection.

  • Skeleton/Screening Bucket

    Part#
    Please Contact Us TBD
    Designed to remove and separate rocks and debris from soil and sand.
    100% High Tensile Steel construction.
    Custom screen sizes available.

  • Ditching Bucket

    Part#
    Please Contact Us TBD
    100% High Tensile Steel construction & AR450 wear protection.
    Drainage holes and mud release chains are optional.
    Extra wide bucket used for ditch cleaning, sloping and grading.
    Add a smooth or serrated edge for different applications.

  • Rippers

    Lbs Part#
    54” Ripper - Includes Removable Tooth 1350 250RI901
    + Shank Guard - 450 Brinell
    Optional replaceable AR450 Shank Guard on 160s and up.
    E-Z Grab Lift Bar
    Full adapter instead of nose piece - reduces broken adapters.
    Flat cleanup edge on the bottom for moving materials while ripping.
    100% High Tensile Steel construction & AR450 wear protection.

  • Brush Rakes

    Tines Lbs Part#
    72” Brush Rake 6 2550 250RB901
    84” Brush Rake 6 250RB902
    The Brush Rake is designed to easily remove and pile brush, roots and stumps with minimal retained soil.
    Matches precisely with EFI thumbs.
    100% High Tensile Steel construction.

  • 360° Rotating Mat Grapples

    Lbs Part#
    Quad Arm Mat Grapple 5950 250GM904
    Extremely versatile tool used to precision place rig mats, creating access for machines to work in remote areas.
    Super powerful & efficient long life motor.
    Internal static brake to eliminate mat drift
    Full width stop pads to protect cylinders.
    100% High Tensile Steel construction.
    Built in load holds, to prevent mat dropping.4 mat capacity.

  • Top Clamp/Pipe Handler

    Part#
    Please Contact Us TBD

  • Cutting Edges

    Part#
    64” Smooth Edge 300ED901
    64” Serrated Edge 300ED909
    68” Smooth Edge 300ED903
    68” Serrated Edge 300ED911
    74” Smooth Edge 300ED905
    74” Serrated Edge 300ED913
    88” Smooth Edge 300ED907
    88” Serrated Edge 300ED915
    Bolt on cutting edges extend the life of a bucket by adding a wear edge to the front of a bucket.
    Serrated Edges are designed to loosen hard to penetrate materials, such as pached gravel.
    Edges include hardware.
    Rake edges are designed to dig like a tooth and grade like a smooth edge.
    Made with AR 450 steel
    Smooth edges are designed for loose material, or finishing and grading work.

  • Options

    Part#
    Pin Connected Lugging (Pins Not Included) 250LP901
    Individual Pins 250LP902
    Wedge Conversion Lugs 250LU903
    + Installation 250LU904
    100% High Tensile Steel construction.
    Pins
    Pin-on lugging
    May be subject to design fees.
    Wedge style lugging

  • Adapters

    Part#
    Bolt On Adapter 250AD901
    Pin On Adapter 250AD902
    100% High Tensile Steel construction.
    May be subject to design fees.
    Made to fit any quick coupler design or lugging configurations.
    Built to suit all different types of Hammers, Compactors, Augers, etc.
    Available in pin-on or bolt-on options.

  • Pipeline Spoon

    Lbs Part#
    Pipeline Spoon 2485 250NP901
    Used for cleaning out underneath existing pipelines, making room for repairs and tie-ins.
    100% High Tensile Steel construction.